返回技能目录
静态审阅文档处理

技能研究档案

performing-threat-modeling-with-owasp-threat-dragon

来源声明

Uses OWASP Threat Dragon (web or desktop) to build data flow diagrams, identify threats with STRIDE, LINDDUN, CIA, DIE, or PLOT4ai methodologies via its auto-generation rule engine, and produce PDF threat model reports. Use during secure design review of an application architecture to build a formal threat model and document mitigations for GRC compliance.

保留作者的英文原始描述。它表达设计意图,不代表已验证的实际效果。

Uses OWASP Threat Dragon (web or desktop) to build data flow diagrams, identify threats with STRIDE, LINDDUN, CIA, DIE, or PLOT4ai methodologies via its auto-generation rule engine, and produce PDF threat model reports. Use during secure design review of an application architecture to build a formal threat model and document mitigations for GRC compliance.

documentsreferencesscripts

研究摘要

机器生成分析,等待人工复核

以下观察来自确定性源码解析,不代表人工安全审查或受控任务评估。

来源描述:Uses OWASP Threat Dragon (web or desktop) to build data flow diagrams, identify threats with STRIDE, LINDDUN, CIA, DIE, or PLOT4ai methodologies via its auto-generation rule engine, and produce PDF threat model reports. Use during secure design review of an application architecture to build a formal threat model and document mitigations for GRC compliance. 此双语摘要由所收集的源文本和文件结构确定性地生成,等待人工编辑复核。

审阅范围

对所收集的 SKILL.md 及辅助文本/代码进行确定性静态分析。机器辅助候选和发现等待人工编辑复核;不评估动态行为或效果。

可观察能力

  • Workflow[来源陈述;暂定,未测试。证据:skills/performing-threat-modeling-with-owasp-threat-dragon/SKILL.md:L89]
  • Step 1 --- Install Threat Dragon[来源陈述;暂定,未测试。证据:skills/performing-threat-modeling-with-owasp-threat-dragon/SKILL.md:L91]
  • Step 2 --- Define the Scope[来源陈述;暂定,未测试。证据:skills/performing-threat-modeling-with-owasp-threat-dragon/SKILL.md:L106]
  • Step 3 --- Create Data Flow Diagrams[来源陈述;暂定,未测试。证据:skills/performing-threat-modeling-with-owasp-threat-dragon/SKILL.md:L115]
  • Step 4 --- Identify Threats[来源陈述;暂定,未测试。证据:skills/performing-threat-modeling-with-owasp-threat-dragon/SKILL.md:L129]
  • Step 5 --- Define Mitigations[来源陈述;暂定,未测试。证据:skills/performing-threat-modeling-with-owasp-threat-dragon/SKILL.md:L145]
  • Step 6 --- Generate Reports[来源陈述;暂定,未测试。证据:skills/performing-threat-modeling-with-owasp-threat-dragon/SKILL.md:L153]
  • Step 7 --- Integrate into SDLC[来源陈述;暂定,未测试。证据:skills/performing-threat-modeling-with-owasp-threat-dragon/SKILL.md:L162]

限制与范围

  • 静态分析无法评估运行时行为、命令是否成功、网络可达性或模型输出质量。
  • 未执行任何命令、脚本、网络请求、模型调用或受控技能测试。
  • 类别、标签、能力、工作流程和双语编辑摘要均为待人工复核的确定性候选,并非已验证结果。
  • 在后续管线实际执行并记录官方模型专用计数之前,无法提供精确 token 数。

适用读者

  • 评估是否检查并安装该来源技能的实践者;此受众由产品语境推断,并非测量得到的使用情况。[证据:skills/performing-threat-modeling-with-owasp-threat-dragon/SKILL.md:L1-L40]

技能包含哪些内容

文件清单来自记录提交中的采集源码。路径与大小属于结构观察,不代表质量评价。

个文件
8
Markdown 文件
5
个脚本
2
个引用
4
大小
40.1 KB
结构复杂度
低

文件清单

路径类型字节
skills/performing-threat-modeling-with-owasp-threat-dragon/assets/template.md引用1,014 B
skills/performing-threat-modeling-with-owasp-threat-dragon/LICENSE其他11 KB
skills/performing-threat-modeling-with-owasp-threat-dragon/references/api-reference.md引用2 KB
skills/performing-threat-modeling-with-owasp-threat-dragon/references/standards.md引用1.8 KB
skills/performing-threat-modeling-with-owasp-threat-dragon/references/workflows.md引用1.8 KB
skills/performing-threat-modeling-with-owasp-threat-dragon/scripts/agent.py脚本7.6 KB
skills/performing-threat-modeling-with-owasp-threat-dragon/scripts/process.py脚本6.6 KB
skills/performing-threat-modeling-with-owasp-threat-dragon/SKILL.md指令8.3 KB

SKILL.md 前置元数据

{
  "name": "performing-threat-modeling-with-owasp-threat-dragon",
  "description": "Uses OWASP Threat Dragon (web or desktop) to build data flow diagrams, identify threats with STRIDE, LINDDUN, CIA, DIE, or PLOT4ai methodologies via its auto-generation rule engine, and produce PDF threat model reports. Use during secure design review of an application architecture to build a formal threat model and document mitigations for GRC compliance.",
  "domain": "cybersecurity",
  "subdomain": "devsecops",
  "tags": [
    "threat-modeling",
    "owasp",
    "threat-dragon",
    "stride",
    "linddun",
    "secure-design",
    "dfd",
    "data-flow"
  ],
  "version": "1.0",
  "author": "mahipal",
  "license": "Apache-2.0",
  "nist_ai_rmf": [
    "MEASURE-2.7",
    "MAP-5.1",
    "MANAGE-2.4"
  ],
  "atlas_techniques": [
    "AML.T0070",
    "AML.T0066",
    "AML.T0082"
  ],
  "nist_csf": [
    "PR.PS-01",
    "GV.SC-07",
    "ID.IM-04",
    "PR.PS-04"
  ],
  "mitre_attack": [
    "T1195",
    "T1554",
    "T1059.004"
  ]
}

对运行顺序的一种解读

此工作流根据源码材料重建表面顺序。除非明确记录受控评估,否则它属于暂定解读,而非真实运行轨迹。

  1. 01
    操作

    Overview

    来源描述的步骤候选,位于“Overview”;未经执行验证。

  2. 02
    判断

    When to Use

    来源描述的决策候选,位于“When to Use”;未经执行验证。

  3. 03
    操作

    Threat Modeling Methodologies

    来源描述的步骤候选,位于“Threat Modeling Methodologies”;未经执行验证。

  4. 04
    操作

    Workflow

    来源描述的步骤候选,位于“Workflow”;未经执行验证。

  5. 05
    操作

    Step 1 --- Install Threat Dragon

    来源描述的步骤候选,位于“Step 1 --- Install Threat Dragon”;未经执行验证。

  6. 06
    操作

    Step 2 --- Define the Scope

    来源描述的步骤候选,位于“Step 2 --- Define the Scope”;未经执行验证。

查看全部工作流候选节点 (43 个候选步骤)
  1. 07
    操作

    System name and description

    来源描述的步骤候选,位于“Step 2 --- Define the Scope”;未经执行验证。

  2. 08
    操作

    Assets being protected (user data, credentials, payment info)

    来源描述的步骤候选,位于“Step 2 --- Define the Scope”;未经执行验证。

  3. 09
    操作

    External dependencies (third-party APIs, cloud services)

    来源描述的步骤候选,位于“Step 2 --- Define the Scope”;未经执行验证。

  4. 10
    操作

    Compliance requirements (GDPR, HIPAA, PCI DSS)

    来源描述的步骤候选,位于“Step 2 --- Define the Scope”;未经执行验证。

  5. 11
    操作

    Trust boundaries (network segments, authentication zones)

    来源描述的步骤候选,位于“Step 2 --- Define the Scope”;未经执行验证。

  6. 12
    操作

    Step 3 --- Create Data Flow Diagrams

    来源描述的步骤候选,位于“Step 3 --- Create Data Flow Diagrams”;未经执行验证。

  7. 13
    操作

    Step 4 --- Identify Threats

    来源描述的步骤候选,位于“Step 4 --- Identify Threats”;未经执行验证。

  8. 14
    操作

    Mitigated: Existing controls address the threat

    来源描述的步骤候选,位于“Step 4 --- Identify Threats”;未经执行验证。

  9. 15
    操作

    Not Applicable: Threat does not apply to this context

    来源描述的步骤候选,位于“Step 4 --- Identify Threats”;未经执行验证。

  10. 16
    操作

    Open: Threat needs to be addressed (assign priority and owner)

    来源描述的步骤候选,位于“Step 4 --- Identify Threats”;未经执行验证。

  11. 17
    操作

    Step 5 --- Define Mitigations

    来源描述的步骤候选,位于“Step 5 --- Define Mitigations”;未经执行验证。

  12. 18
    操作

    Mitigation strategy (prevent, detect, respond, transfer)

    来源描述的步骤候选,位于“Step 5 --- Define Mitigations”;未经执行验证。

  13. 19
    操作

    Specific technical controls (encryption, authentication, rate limiting)

    来源描述的步骤候选,位于“Step 5 --- Define Mitigations”;未经执行验证。

  14. 20
    操作

    Owner responsible for implementation

    来源描述的步骤候选,位于“Step 5 --- Define Mitigations”;未经执行验证。

  15. 21
    操作

    Priority and timeline for remediation

    来源描述的步骤候选,位于“Step 5 --- Define Mitigations”;未经执行验证。

  16. 22
    操作

    Step 6 --- Generate Reports

    来源描述的步骤候选,位于“Step 6 --- Generate Reports”;未经执行验证。

  17. 23
    操作

    Executive summary of the threat model

    来源描述的步骤候选,位于“Step 6 --- Generate Reports”;未经执行验证。

  18. 24
    操作

    Data flow diagrams with annotations

    来源描述的步骤候选,位于“Step 6 --- Generate Reports”;未经执行验证。

  19. 25
    操作

    Threat inventory with severity ratings

    来源描述的步骤候选,位于“Step 6 --- Generate Reports”;未经执行验证。

  20. 26
    操作

    Mitigation status and recommendations

    来源描述的步骤候选,位于“Step 6 --- Generate Reports”;未经执行验证。

  21. 27
    操作

    Compliance mapping where applicable

    来源描述的步骤候选,位于“Step 6 --- Generate Reports”;未经执行验证。

  22. 28
    操作

    Step 7 --- Integrate into SDLC

    来源描述的步骤候选,位于“Step 7 --- Integrate into SDLC”;未经执行验证。

  23. 29
    操作

    Conduct threat modeling during the design phase of new features

    来源描述的步骤候选,位于“Step 7 --- Integrate into SDLC”;未经执行验证。

  24. 30
    操作

    Update threat models when architecture changes occur

    来源描述的步骤候选,位于“Step 7 --- Integrate into SDLC”;未经执行验证。

  25. 31
    操作

    Review threat models during security design reviews

    来源描述的步骤候选,位于“Step 7 --- Integrate into SDLC”;未经执行验证。

  26. 32
    操作

    Store threat model files in version control alongside code

    来源描述的步骤候选,位于“Step 7 --- Integrate into SDLC”;未经执行验证。

  27. 33
    操作

    Reference threat model findings in security acceptance criteria

    来源描述的步骤候选,位于“Step 7 --- Integrate into SDLC”;未经执行验证。

  28. 34
    操作

    Threat Model File Format

    来源描述的步骤候选,位于“Threat Model File Format”;未经执行验证。

  29. 35
    操作

    CycloneDX TMBOM Integration

    来源描述的步骤候选,位于“CycloneDX TMBOM Integration”;未经执行验证。

  30. 36
    操作

    Best Practices

    来源描述的步骤候选,位于“Best Practices”;未经执行验证。

  31. 37
    操作

    Start simple: Begin with high-level DFDs (Level 0) before decomposing into detailed diagrams

    来源描述的步骤候选,位于“Best Practices”;未经执行验证。

  32. 38
    操作

    Involve developers: Include development team members in threat modeling sessions for realistic threat assessment

    来源描述的步骤候选,位于“Best Practices”;未经执行验证。

  33. 39
    操作

    Time-box sessions: Limit initial sessions to 90 minutes; iterate in follow-up sessions

    来源描述的步骤候选,位于“Best Practices”;未经执行验证。

  34. 40
    操作

    Prioritize by risk: Use severity ratings (Critical, High, Medium, Low) to prioritize mitigations

    来源描述的步骤候选,位于“Best Practices”;未经执行验证。

  35. 41
    操作

    Living documents: Treat threat models as living documents that evolve with the system

    来源描述的步骤候选,位于“Best Practices”;未经执行验证。

  36. 42
    操作

    Automate where possible: Use the rule engine for initial threat generation, then refine manually

    来源描述的步骤候选,位于“Best Practices”;未经执行验证。

  37. 43
    操作

    References

    来源描述的步骤候选,位于“References”;未经执行验证。

潜在风险面

静态发现用于提示安装前需要检查的位置,不能证明一项技能安全、恶意或有效。

有需要复核的项目

收集的文本中有 26 项确定性词法发现需要复核。发现可能仅位于文档中,不证明已执行或可被利用;仅含二进制的文件未扫描。

网络访问已观察到
文件写入已观察到
凭据使用未观察到
中

文本提及网络访问

12 次命中

此源文件行包含 URL 或网络客户端。应检查目标地址、发送的数据和信任边界;静态文本无法证明实际发生了网络活动。 该规则在收集文本中命中 12 处;此处列出 3 个代表位置。命中文本可能只是文档,分析器没有执行它。

提示

文本描述或实现了文件修改

14 次命中

此行包含可能的文件写入或重定向操作。应检查目标路径和覆盖行为;静态审查没有写入任何文件。 该规则在收集文本中命中 14 处;此处列出 3 个代表位置。命中文本可能只是文档,分析器没有执行它。

上下文可能消耗在哪里

发现、激活与资源层具有不同含义。只有使用指定官方方法并记录模型的运行时,才显示精确数值。

精确 token 计数不可用

在管线使用明确模型执行官方精确计数之前,包括文件清单在内的所有 token 值均为 null。

未使用要求的官方方法记录 token 测量。本档案不会用字符数、文件大小或估计值替代。

受控评估

没有受控评估

该技能仅具备以上标明的证据。不声称任何任务成功率、token 效率、延迟或质量优势。

尚未测试

在源码可见的情况下使用

安装命令
Inspect the pinned source at https://github.com/mukul975/Anthropic-Cybersecurity-Skills/blob/54a798831d2266a3ca61ce68a7acb80b81160d57/skills/performing-threat-modeling-with-owasp-threat-dragon/SKILL.md and follow the source repository's installation instructions. No installation was performed or verified by this static analyzer. Source license: Apache-2.0.

前置条件

  • 静态分析无法评估运行时行为、命令是否成功、网络可达性或模型输出质量。
  • 未执行任何命令、脚本、网络请求、模型调用或受控技能测试。
  • 类别、标签、能力、工作流程和双语编辑摘要均为待人工复核的确定性候选,并非已验证结果。
  • 在后续管线实际执行并记录官方模型专用计数之前,无法提供精确 token 数。

示例提示词

未提供

附上限制条件的判断

优势

  • 快照包含 8 个收集文件、5 个 Markdown 文件和 2 个脚本文件,可进行源代码级检查。[证据:skills/performing-threat-modeling-with-owasp-threat-dragon/SKILL.md:L1]

注意事项

  • 尚未确立功能、安全或模型质量结果。安装或发布前,人工复核必须检查源代码上下文和所有引用发现。
研究结论

仅为暂定的确定性静态清单;等待人工编辑复核以及独立的受控评估。不构成安装建议、安全保证或有效性声明。

从结构上保持可追溯

档案是对公开工件的限时阅读,而非背书。请通过来源链接检查确切的上游材料。

mukul975Anthropic-Cybersecurity-Skillsskills/performing-threat-modeling-with-owasp-threat-dragon
来源类型
社区
提交
54a798831d2266a3ca61ce68a7acb80b81160d57
采集时间
2026年11月20日
最近核查
2026年11月20日
上游许可证
Apache-2.0
仓库星标
36,446
内容依据

仅对提供的文件进行确定性词法解析、YAML frontmatter 校验、文件清单、来源描述的工作流程提取和启发式暂定分类。由机器生成;无 LLM、执行、动态测试或人工编辑批准。